Tube Inserts, Gasket Cutters, Air Horn

Performance Data

PSIG	MODEL	IMPOSED STATIC PRESSURE - IN. WG.
PSIG	MODEL	0	.5	1.0	1.5	2.0
40	3P	970	900	830	920	620
	3	1080	1000	920	800	690
	6	2750	2500	1900	950	750
	8	4030	3520	2600	1950	920
	10	6200	5400	5000	4400	3400
60	3P	1125	1070	1000	936	840
	3	1250	1190	1120	1040	930
	6	3450	3225	2900	2300	1100
	8	5000	4700	4100	3550	2700
	10	7500	6800	6400	6000	5000
80	3P	1350	1285	1190	1100	1000
	3	1500	1425	1325	1225	1120
	6	4000	3775	3500	3400	2775
	8	6000	5600	5150	4600	3900
	10	8500	8000	7600	7000	6600
100	3P	1575	1520	1450	1375	1290
	3	1750	1680	1610	1525	1430
	6	4600	4425	4225	3975	3700
	8	6300	5730	5290	4920	3990
	10	10500	9500	8000	7500	6800

•	ALL MODELS ARE BUILT TO ABS (AMERICAN BUREAU SHIPPING) APPROVED STANDARDS.
•	GALVANIZED STEEL DIFFUSER CONE IS BOLTED FOR EASY REPLACEMENT.

MODEL	FREE AIR INDUCTION RATIOS AT VARIOUS INLET PRESSURES
MODEL	40 PSIG	60 PSIG	80 PSIG	100 PSIG
3P	31	25	24	22
3	32	26	25	23
6	42	36	25	21
8	35	30	26	20
10	32	28	21	18

MODEL	A	B	C	AIR INLET	MOUNTING FACE
MODEL	A	B	C	D	E	NO.	WIDTH	WGT
3P	8"	6"	17.0"	1/2" NPTF	7.25"	4	.63"	7LBS.
3	8"	8"	36.0"	1/2" NPTF	7.25"	4	.63"	9LBS.
6	11.5"	12.0"	45.0"	1" NPTF	10.75"	4	.63"	26LBS.
8	14.5"	14"	48.0"	1" NPTF	13.5"	4	.63"	38LBS.
10	17.5"	15.75"	48.0"	1" NPTF	15.5"	6	.63"	42LBS.

SAFETY NOTE
AIR MOVEMENT THROUGH COMPRESSED AIR UNITS CAN GENERATE A STATIC CHARGE. UNITS MUST BE GROUNDED TO ELIMINATE BUILD-UP OF STATIC ELECTRICITY DURING OPERATION.

<<Back