ROR One Revolution
Tube Cutters

For cutting off tubes in tube sheets. Sizes range from 1/2" through 3"; gauges from 10 through 30. Other sizes and gauges are available upon request.

 

RPTC Push Type
Internal Tube Cutter

"Push Type" Internal Tube Cutter quickly cuts the walls of tubes in Condensers and Heat Exchangers. This sturdy "Push Type" Internal Tube Cutter can be used with a portable Electric or Air Drill. For tubes 5/8 to 1-1/4


Tube Wall Reducers

For reducing wall of the tube to ease removal from tube sheets. Sizes range from 1/4" through 3"; gauges from 8 through 24. Other sizes and gauges are available upon request.

 

 

RCT Collapsing Tools

For collapsing thin wall tubes to ease removal from tube sheets. Sizes range from 1/4 through 3; gauges from 12 through 30; shanks 01 and 06. Other sizes, gauges and shanks upon request.

 

RTD Tube Drifts
For knocking out tube stubs from tube sheets. Sizes range from 3/8" through 2"; gauges from 8 through 28; shanks 01, 06, 12 and 15. Other sizes, gauges and shanks are available upon request.

Tube Pulling Tools
Tube Spears

For pulling tubes out of tube sheets. Sizes range from 1/2" through 3"; gauges from 6 through 30. Other sizes and gauges are available upon request. HORSESHOE ADAPTER DOUBLE PULL ADAPTER HORSE SHOE LOCK

Operations, Instructions, and Specifications

 

RHR Ram
Tube Puller

Complete with ram, pump, hoses to pull tubes 1/2" to 2".

 

One Revolution Tube Cutter Bits.
Sizes range from 1/2" through 3".
Slide Hammer (not shown)


Home | Tube Cleaners | Tube Removal Tools & Cutters | Tube Assembly Tools & Expanders
Tube Plugs
| Specialty Tube Plugs | Tube Plug Repair KitsTube Plug Installation Instructions
Tube Leak Detectors
| Gasket Cutters, Tube Inserts, Air HornsConfined Space Monitor
Custom Capabilities | Our Products at Work | Contact Us


e-mail:jrrinc@earthlink.net