Tube Inserts

You are here

Plastic (Nylon) Tube Inserts

Prevent tube end erosion and costly retubing of Condenser and Heat Exchanger. PLASTIC TUBE INSERTS offer permanent protection for new tubes or extended life for old tubes already pitted or thinned at the insert section. Flared end of the insert is designed to give smooth venture entrance for the fluid to flow. Nylon inserts are resistant to chemical and are not affect by oils or greases. They will withstand temperatures to 250 °F.

 

Part Numbersort descendingCondenser Tube O.DCondenser Tube GaugeCondenser Tube WallCondenser Tube I.DInsert LengthRFQ
JRRNTI581865/8"180.0490.5276Request a Quote
JRRNTI582065/8"200.0350.5556Request a Quote
JRRNTI341663/4"160.0650.626Request a Quote
JRRNTI341863/4"180.0490.6526Request a Quote
JRRNTI781667/8"160.0650.7456Request a Quote
JRRNTI781867/8"180.0490.7776Request a Quote
JRRNTI11661"160.0650.876Request a Quote
JRRNTI11861"180.0490.9026Request a Quote
JRRNTI12061"200.0350.936Request a Quote

 

Metal Tube Inserts

Metal Tube Inserts are manufactured to order. Metal inserst are manufactured to fit closely to the ID of the existing tube. The inserts can be provided in different lengths and materials, with or without a flared end. The inserts should be of similar material to the existing tube material. The inserts are installed by expanding into the tube sheet.

Metal Tube Insert Materials: 90/10 CuNi, 70/30 CuNi, Stainless Steel, AL-6XN, Duplex, Monel, Titanium.

*Supply OD and gauge of tube when ordering inserts.
 

Subscribe to RSS - Tube Insert